Wire Belt belt maintenance tools

Eddie Wire Straightener part number 017007

Essential for connecting and maintaining Flat-Flex^® Gird

• High quality wire straightening tool
• To eliminate deformations in the wire and adjust Z-bends
• Perfect for opening and closing C-Cure end edges
• Suitable for wire diameters from 0,90 to 2,35 mm

Universal cutting pliers part number 017008

For cutting all flat flex^® belts

• The microstructure cutting edge allows cutting of all Flat-Flex® belts including 4 mm wire diameter.
• The articulated lever design provides a mechanical advantage and allows high-strength wire to be cut with less effort.
• Fully heat treated, chemically blackened dies
• Multi-component handle with integrated spring return and locking device
• Manufactured according to DIN ISO 5743:2004

Fine wire side cutter part number 017004

For cutting fine wire flat flex^® Gird

• Particularly suitable for cutting high-strength spring steel wire belts
• Slim profile head for cutting rod braid belts with small pitches, such as those commonly used when coating with chocolate
• Thanks to their leverage, these pliers reduce the effort required for cutting by approx. 40%
• Handle with integrated spring return and locking device
• Manufactured according to DIN ISO 5747:1995

Special side cutter part number 017003

For cutting and connecting Flat-Flex^® Gird

• The jaws are aligned parallel to each other over the entire range of movement and therefore offer a secure hold
• The jaws are profiled and have a V-longitudinal groove. This means that the wire on both sides can be passed through the neck of the pliers and is held over the entire length of the jaws.
• Spring return and grooved jaws
• Anti-rust coated with nickel plated handles, fully heat treated, chemically blackened jaws and cutting edges
• The robust mechanics enable cutting of high-strength wires with reduced effort
• The lateral position of the cutting edge allows the pliers to be used even in hard-to-reach places.

Micro wire cutters part number 017006

For cutting stainless steel flat flex^® belts

• Thanks to the self-sharpening design, wire can be cut without losing the sharpness of the wire cutters
• Compact spring return design, heat treated and chemically blackened.
• Suitable for wire diameters up to 1,27 mm

EZ-Splice multi-head profiling pliers part number 017009

For use with EZ-Splice connecting rods

• Individual inserts for every pitch and wire combination within the EZ-Splice product range
• Crimps the EZ-Splice connecting rod, ensuring a secure belt connection with a flat contact surface
• Prevents “over-crimping”

Compact Grid Belt Tool Set Part Number 017013

For connecting Compact Grid belts

• Specially developed Compact-Grid tool set, simplifies the connection of Compact-Grid belts
• Each tool set contains two Compact-Grid splicing levers and a set of Compact-Grid bending pliers
• The tools help align and connect the strap
• The tools enable an optimally shaped crimp that closes the belt connection without damaging the surrounding rods or “over-crimping” the connecting rod.

Ladder chain clinch tool part number 017012

For use with ladder chain straps

• Special tool for easily opening and closing edges when connecting ladder chain straps